Lab Cleaning Services

Specialized Cleaning for Laboratory Environments

Laboratories require a level of cleanliness that goes far beyond standard commercial janitorial work. Contaminated surfaces can compromise test results, endanger personnel, and violate regulatory standards. EcoFi's Lab Cleaning services are designed for the unique demands of laboratory environments — where precision, safety, and compliance are non-negotiable.

Our lab cleaning professionals are trained in chemical safety, biohazard handling, and contamination prevention protocols. Every procedure follows OSHA, CDC, and facility-specific guidelines to protect your research integrity, staff safety, and regulatory standing.

Lab Cleaning Procedures

Our laboratory cleaning process follows a rigorous, multi-step procedure designed to maintain sterile conditions and prevent cross-contamination between work areas.

1. Pre-Cleaning Assessment

1. Review facility safety data sheets (SDS) for chemicals and materials present in the lab
2. Identify biohazard zones, chemical storage areas, and sensitive equipment locations
3. Confirm required personal protective equipment (PPE) for the specific lab environment
4. Coordinate with lab managers on active experiments, restricted areas, and special instructions

2. Surface Decontamination

1. Clear and organize work surfaces, removing disposable items and waste
2. Apply appropriate disinfectant based on lab type (chemical, biological, or clinical)
3. Allow required contact/dwell time for disinfectant to be effective against target organisms
4. Wipe down all bench tops, counters, and work surfaces using lint-free, non-shedding materials
5. Disinfect sinks, faucet handles, and eyewash stations

3. Equipment and Instrument Exterior Cleaning

1. Power down and clean exterior surfaces of microscopes, centrifuges, and analyzers (per manufacturer guidelines)
2. Wipe fume hood interiors, sash tracks, and baffles with appropriate solvents
3. Clean biosafety cabinet (BSC) exteriors and surrounding surfaces
4. Disinfect refrigerator and freezer handles, shared instrument panels, and touchscreens

4. Floor Care

1. Sweep or dust-mop to remove particulates and debris without creating airborne contamination
2. Wet-mop with lab-grade disinfectant, paying attention to corners, under benches, and near drains
3. Clean floor drains according to facility protocol to prevent biofilm buildup
4. Apply anti-slip treatments to wet-area floors as needed

5. Waste and Sharps Handling

1. Segregate and remove general waste, chemical waste, and biohazard waste according to regulatory requirements
2. Replace sharps containers when at fill line and ensure proper labeling
3. Dispose of contaminated cleaning materials in designated biohazard receptacles
4. Restock PPE stations (gloves, gowns, face shields) as needed

6. Final Verification

1. Conduct ATP bioluminescence testing on critical surfaces to verify decontamination
2. Perform visual inspection of all cleaned areas against quality checklist
3. Document all cleaning activities, ATP test results, and any issues noted
4. Provide cleaning verification report to lab management for compliance records

What We Cover

• Bench tops, countertops, and all laboratory work surfaces
• Fume hoods, biosafety cabinets, and laminar flow hoods (exterior cleaning)
• Floors, walls, and ceiling vents in clean room and general lab areas
• Sinks, eyewash stations, and emergency shower areas
• Cold storage unit exteriors (refrigerators, freezers, cryogenic storage)
• Chemical storage cabinets and shelving (exterior surfaces)
• Common areas including break rooms, offices, and corridors adjacent to lab space
• Restrooms and locker rooms within laboratory facilities

Labs We Serve

• Clinical and diagnostic laboratories
• Research and development labs (university and private)
• Pharmaceutical and biotech laboratories
• Pathology and histology labs
• Environmental and water testing labs
• Food science and quality control laboratories
• Veterinary diagnostic labs